Home >

How Does The Change Of The Shoe Last Determine Its Head Shape?

2008/8/15 12:26:00 41782

Compared with the shoe last, there is a big difference in the shape change between the sport shoe last and the shoe last.

In order to facilitate the movement of the feet, the front and rear stilts of the sports shoe last are smaller, and the change of bottom center concavity is also small.

In order to improve the foot capacity of the shoe cavity, the heredity of the sport shoe last is larger, which makes the last shape full, and the angle between the back and back of the last shoe is larger.

The last line of the sports shoe last is straight, and the bottom line of the middle waist is straight.

On the whole, the change of sports shoe last focuses on the front and front parts.

From the shape of the last shape, there are four kinds of sharp head, round head, square round head and square head.

(1) the round head type is mostly used for the last design of running training shoes, tennis training shoes and football shoes.

(2) square head type shoe design, which is commonly used for bicycle racing shoes, is a typical special sport shoe last.

(3) the square head is generally used for ball sports shoes, such as basketball shoes, etc.

Because the front tip is stressed when landing, the stability requirement is higher. The round head sport shoe last is one of the most popular sports shoes.

(4) the pointed type is usually used for the last type design of special four track competition shoes.

It is not suitable for landing too high in sports.

The change of the shoe last shoe determines the head shape of the sports shoes. Generally speaking, the round head, the square head and the round head can be substituted for each other unless there is a higher demand for the front force or movement direction of the sneakers.


  • Related reading

Put An End To The Development Of Eco Technology Leather With Painted Accessories

Shoe material excipients
|
2008/8/15 12:25:00
41776

Design Requirement And Learning Stage Of Last Three Stages

Shoe material excipients
|
2008/8/14 14:14:00
41771

Nano Special Functional Fiber Technology Breakthrough

Shoe material excipients
|
2008/8/13 14:59:00
41813

The Change Of The Shoe Last Determines Its Head Shape.

Shoe material excipients
|
2008/8/13 14:38:00
41786

Put An End To The Development Of Eco Technology Leather With Painted Accessories

Shoe material excipients
|
2008/8/13 14:37:00
41790
Read the next article

Performance Analysis Of Shoesmaster Software

ShoesMaster shoemaking software is a high performance footwear CAD system developed in the UK. It consists of two stages: grading, discharging, 3D shoe upper design, last design and bottom design. It is one of the most popular CAD software in the world. The software is developed independently by the underlying technology, and has strong development strength and technical background. But the software has been promoted in China for many years and is not worth investigating.