Home >

Push Pull Technology With Shoulder Sleeve Structure

2010/2/9 18:09:00 103

Push Pull Technology With Shoulder Sleeve Structure


The shoulder sleeves are sleeves that are connected to the part or all of the shoulders of the big body. They can be divided into semi inserted shoulder sleeves and all inserted shoulder sleeves according to the different shoulder positions.

The pushover of the fully inserted shoulder sleeve is especially special, because the size changes of each part are tight as it involves the collar, shoulder width and sleeve length in a template.



The shoulder sleeves are sleeves that are connected to the part or all of the shoulders of the big body. They can be divided into semi inserted shoulder sleeves and all inserted shoulder sleeves according to the different shoulder positions.

The insertion of the whole shoulder sleeves is particularly special. Because of the same size, changes in the size of each part are closely related to each other in a template. How to make the garment styling and the change of the structural proportions consistent with the standard base template are the key points for pushing the shoulder sleeves. The following is a comprehensive analysis of the pushing process of the full sleeved shoulder sleeves starting from the drawing of the template.


1. according to the design plane style chart (Figure 1), make the structural template chart (Fig. 2), the A point is the combination point of the sleeve and the big body, and its location is near the chest width point.

The B point is the intersection point between the shoulder sleeve and the neckline.

The C point is the position of the shoulder end, the turning point of the sleeve arc, and the key point to control the shoulder width changes when inserting shoulder sleeves.


 


 

  • Related reading

Fashion Trends In 2010/2011

Learning Area
|
2010/1/27 11:16:00
113
Read the next article

Plate Making Method Of Skew Cut Dress