3D Printing Has Gradually Begun To Be Used By Some Enterprises.

< p > 2013, 3D printing technology occupied the forefront of scientific research and development. 3D printing technology was highly praised for its high efficiency and fast cost saving characteristics. It has been applied in footwear, industrial design, construction, engineering and other fields. Magazine thinks that 3D printing will change the world in a long time.

< /p >

< p > 2013, 3D printing technology occupies the forefront of R & D of science and technology.

The magazine put 3D printing on the altar, and they said: 3D printing will change the world in a long time.

For the "capital of processing industry", Dongguan's development and utilization of new technology is the main driving force for local economic development. 3D printing has gradually begun to be used by some enterprises.

< /p >

< p style= "text-align: center" > img border= "0" alt= "align=" center "src=" /uploadimages/201307/15/20130715093638_sj.JPG "/" < < > >

Although P 3D printing technology is highly respected in the business world, many people still do not understand this technology. If 3D printing technology finally goes to the streets, the public can easily purchase gifts or crafts printed through it. Many citizens say: after all, it is a brand new technology. If the workmanship is exquisite, many people will still be willing to taste it.

< /p >

< p > as for the final use of 3D printing technology, many people think that it should be used in industrial production.

For the future trend of 3D printing technology, most people say it will take at least 10 years.

< /p >

< p > according to Zhou Zirong, director of the Collaborative Innovation Office of Dongguan University of Technology, 3D printing technology has obvious advantages in the field of mold manufacturing.

He believes that the market for product upgrading is very fast, if a new product is produced, if there is no market, then it will outweigh the gains.

It takes hundreds of thousands or even millions of dollars to develop a mold.

Using 3D printing technology, the product can be developed first. If the technical requirements and market demands are met, the mold development will be carried out and mass production is further carried out.

< /p >

< p > the advantage of using 3D printing technology is that it can greatly shorten the production cycle and save production costs.

For example, the processing of a special shaped waterway of a mold, using traditional manufacturing technology, is very difficult, not to mention, at least 5 people's hands, about 12 working days to complete, and sometimes can also cause material waste.

But the use of 3D printing technology can be completed in 73 hours, but also has the characteristics of high precision, so that it can continuously improve the competitiveness of the market, and seize the opportunity in the development.

In addition, some people have misunderstood 3D printing technology, and think that 3D printing technology will replace the traditional mold manufacturing technology. In fact, Zhou Zirong thinks that the two are complementary to each other.

< /p >

< p > it is understood that 3D printing technology is currently applied in jewelry, footwear, industrial design, construction, engineering and construction, automotive, aerospace, dental and medical industries, education, geographic information systems, civil engineering, and other fields.

For the "capital of processing industry" in Dongguan, a revolution in manufacturing is bound to bring about changes.

But many industry insiders told reporters that, limited by technology development and material constraints, in Dongguan, 3D printing technology only exists in enterprises and universities such as mold, automation, creative animation, design and other fields.

< /p >

"P", Hongtai automation equipment Co., Ltd., located in hengying Town, Hengli Town, began to provide 3D printing technology service in 2007.

According to general manager Wu Xiaogang, the popularization of 3D printing technology has become a trend. "Before we bought machinery from Shanghai, the material used is photosensitive resin, and the machine price is about $8. 9 million.

But the surface of the product is not refined enough, and the customers are not satisfied.

< /p >

< p > at present, the company's customers all over the country.

In order to meet customer requirements, Hongtai company successfully developed 3D printers in April this year, and the printed products not only improved their fineness, but also reduced the price of each device to $5. 6 million.

Wu Xiaogang said that at present, 2 units have been produced and will increase to 5 units in a month.

Later, their company should not only continue to expand 3D printing services, but also increase sales Machinery projects.

At the same time, the company is working with Dongguan University of Technology to develop 3D printing equipment for photosensitive resin materials for hand plate and model making. The first prototype trial has been completed, and preliminary industrial tests have been carried out, which is expected to achieve mass production next year.

< /p >